| |
|
| [ 金相顯微鏡前處理耗材 | 切割相關耗材 ] |
| 鑽石切割刀/ 鑽石刀片/ 鑽石切斷刀 |
 |
|
■ Metal Bonded Blades ■
→ High Concentration
Recommended for heneral laboratory sectioning,either low or high speeds.
→ Low Concentration
Recommended for sectioning very hard or brittle materials such as ceramics , silicon , glass and refractories where chipping and pullout need to be kept to a minimum.Used at low or high speeds. |
■ Resin Bonded Blades ■
Recommended for cutting hard,brittle or delicate materials including ceramics,carbides,composites and exotic metals where low heat generation or improved surface finish is desired.Most commonly used at higher speeds. |
|
-------------------------------------------------------------------------- |
| 砂輪刀片/砂輪切割刀 |
 |
■ Abrasive Cut-Off Blades ■
Abrasive cut-off blades consist of abrasive mineral mixed with either resin or rubber to form a continuous matrix(solid core) through the entire blade.Aluminum oxide is recommended for cutting ferrous metals and super alloys,while silicon carbide is best used for cutting non-ferrous metals and alloys.Recommended for medium to high speed cutting on non-gravity fed saws. |
|
-------------------------------------------------------------------------- |
| 切割油/切割潤滑油/切削冷卻液 |
 |
■ Cutting Fluid,Low Speed ■
Designed exclusively for low speed cutting applications where a thicker formula is needed to lubricate blades,remove debris from the cut and reduce friction. |
 |
■ Cutting Fluid,High Speed ■
Recommended for high speed cutting applications to extend the life of cut-off blades and reduce heat.This nontoxic formula contains non-foaming and rust inhibiting additives,and mixes 2% in water. |
|
|
|
| |
|
|
|
|
